# How do you measure the length of a chainsaw blade?

To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.

Roller chain sizes are measured according to the following dimensions; Pitch: The length measured from center of pin to center of pin. For figure 8 chain it is measured from the widest point on the plate. The plate thickness is simply the thickness of the plates from one flat side to the other side of the same plate.

Subsequently, question is, do drive links matter on chainsaw? Number of individual drive links must be counted. No exceptions. Simple length measurements (like “a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links.

Also know, how many links are in a 16 chainsaw chain?

A 16” bar normally requires 66 drive links with . 325 chain, Stihl is 67 but they gotta be different. 72 indicates an 18″ bar.

How do you determine chainsaw chain size?

Measure the distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw’s casing. A tape measure will provide that information. Round the measurement up to the nearest even number if the figure was uneven or fractional. The resulting number is the bar measurement.

### What size file do I need for a 3/8 chain?

It is vital to use the right size file. In general, 1/4- and 3/8-inch-pitch, low-profile chains call for a 5/32-inch file; 0.325-inch-pitch chains require a 3/16-inch file; and standard 3/8-inch-pitch and 0.404-inch-pitch chains demand a 7/32-inch file.

### How many drive links in a 36 chain?

Stihl 36″ 36RS3 Chainsaw Chain Loop (3/8 x . 063) 114 Drive Links, 36RS3114. Swiss made OEM chainsaw chain from Stihl.

### How thick is a chainsaw bar?

063″ (1.3 mm, 1.5 mm, 1.6 mm) has become the accepted standard for all chain saws utilizing 3/8″ pitch chain. There really is no benefit between . 050″, . 058″ or .

### What angle do you sharpen a chainsaw?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain.

### What is the difference in chainsaw chains?

Its key differences are sharp cutting teeth on the outside of the chain loop, and flat drive links on the inside, to retain the chain on the saw’s bar and allow propulsion by the engine or motor. Saw chains (and chainsaws generally) are used for cutting wood.

### What size is #35 chain?

Chain standards Size Pitch Maximum Roller Diameter 25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 40 0.500 in (12.70 mm) 0.312 in (7.92 mm)

### How do you measure the thickness of a chain?

Open the jaws of the caliper so that the chain can fit between them. Turn the chain so that the outermost points of the metal wires that make up the rope chain are between the jaws of the caliper and touching the jaws. Close the jaws and read the thickness of the chain on the caliper’s readout.

### How do you size an anchor chain?

There are 3 main sizes in anchor chain: 1/4 inch for smaller inshore boats, 5/16 inch for mid-size boats, and 3/8 inch for larger offshore boats. The standard rule of thumb is 1 foot of chain per foot of boat.

### Can I put a longer bar on my chainsaw?

Can you put a longer bar on a chainsaw? The answer is yes and no. Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain.

### What do the numbers mean on a chainsaw bar?

So, what do the numbers on a chainsaw chain mean? The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.

### Will any chain fit a Stihl chainsaw?

Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.